![]() ![]() Immerse the probe in the ice/water mixture and make sure not to touch the sides of the container.Turn on the thermometer, unscrew and take off the battery cover.Stir the mixture and let it sit for 10 minutes to allow the ice and water to reach its temperature equilibration.Fill the bottle with ice cubes (no less than 70% of the volume), then top off with cold distilled or purified water (no greater than 30% of the volume).If you don’t have one, use a beaker or a regular cup Use distilled or purified water to make ice cubes in your refrigerator.However, after a long period of use and you believe that the temperature reading displayed by the thermometer is not accurate, you may follow the process below to re-calibrate the thermometer: In most cases, the thermometer was calibrated precisely at our manufacturing facility, and generally, you do NOT need to calibrate the thermometer. The thermometer comes with a Calibration feature. If the thermometer is sleeping with the probe not folded in and then picked up or moved, the thermometer will automatically power on.The thermometer will automatically turn off if the probe is not folded in and no button has been pressed in 90 seconds.Wash the thermometer under running water after use.Press the LOCK button to hold the temperature for 5 seconds.The temperature reading can be displayed with a 360° global viewing angle.Wait until the temperature reading stabilizes on the display.The thermometer will start to measure the internal food Insert the tip of the probe into food being cooked as shown in the picture below.Please note that the temperature unit selected will remain when you turn on the thermometer next time. Press and hold the ☌/☏ button for 3 seconds to switch between ☌ and ☏.Pull the probe away from the body of the thermometer to turn on the thermometer, and fold in the probe to turn off the thermometer.PLEASE READ AND FOLLOW ALL INSTRUCTIONS.Wash under running water without fear!.Wash probe tip with warm soapy sponge or cloth, then rinse and dry.Insert 1* AAA battery with correct polarity (+) and (-) as indicated.Battery: 1 x AAA 1.5V included BEFORE FIRST USE.If the temperature is below -58☏ (-50 ☌) or above 572 ☏ (300 ☌), LLL or HHH will show on the screen Super-Fast Temperature Probe: High precision sensor, you can get a temp readout within 3-4 seconds.Temperature Probe: Insert the probe into food to get the internal meat temperature.Battery Compartment: Use 1 x AAA battery to power the unit.CAL: Press and hold it for 5 seconds to calibrate the unit.Hold for 3 seconds to switch between ☌ and ☏.LIGHT: Press once to turn ON/OFF the backlight 4 C/☏:.LOCK: Press once to lock the current temperature for 5 seconds, press again to unlock.LCD Display: Displays the current temperature. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |